China Sliding Bearing 100% New Tricone Bits for Oil Natural Gas Water Well Drilling

• Type: Core Drill
• Usage: Metal Drilling, Masonry Drilling, Well Drilling, Wood Drilling
• Certification: API
• Name: Tricone Bits
• Item: Tricone Drill Bits for Sale
• Model: Tricone Bit for Well Drilling
• Model NO.: ROS 12"
• Item No: Tricone Bit Weight
• TCI Bit: TCI Tricone Bit
• Bits Sell: Tricone Bits for Sale
• Bits Size: Tricone Bit Sizes
• Model No: Hughes Tricone Bits
• Model Name: Rock Drill Bits
• Item Name: Tricone Rock Bits
• Transport Package: Wooden Box
• Specification: 12"
• Trademark: ROSCHEN
• Origin: China
• HS Code: 843143210
• Production Capacity: 3000

Product Description

Tricone Roller bit is the most widely used drilling bit. When the roller cone bit is working, the cutting teeth alternately contact the bottom of the well, the torque of breaking the rock is small, the contact area between the cutting tooth and the bottom of the well is small, the specific pressure is higher, and it is easy to eat into the formation; the total working length of the working blade is large, thus relatively reducing the wear. Roller bit can adapt to a variety of formations from soft to hard.

According to the number of cones, it can be divided into single-cone bit, tri-cone bit, and assembled multi-cone bit. According to the cutting material can be divided into steel teeth (milled teeth) and insert tooth bit.

The Tricone roller cone bit has been widely used as a tool for drilling rock formations, and a significant improvement in the performance of the bit directly reduces the cost of drilling, especially in the last ten years. The two performance indicators, life time and drilling speed, ultimately determine the extent to which the drill bit affects drilling costs. Raising the penetration rate and service life of the drill bit is an effective way to reduce the drilling cost. It is verified by the data that the improvement of the drilling speed is more effective than the improvement of the bit life to reduce the drilling cost. The improvement of the cutting structure of the drill bit is to improve the drilling machine's machinery. The most direct method of drilling speed. For a long time, people's improvement of the cutting structure mainly focused on the main cutting tooth structure. For example, in the cemented carbide tooth structure, people have successively invented wedge-shaped teeth, spoon-shaped teeth, partial-topped spoon-shaped teeth, and other wearable teeth. . People gradually realized that the gauge structure also has a great impact on the penetration rate and life of drills. In particular, the drill bit used in high-angle wells and horizontal wells requires a reasonable diameter-preserving structure, and many new gauge structures have been researched and developed. Applied to the roller cone bit has achieved good results. 
 

Product Description

What is tci tricone bits feature? 

Size	12"
IADC	437
Bearing Type	sealed bearing
Thread Connection	6 5/8" reg pin
WOB(KN/mm)	0.20~0.70
RPM(r/min)	200~80
Suitable formation	Very soft formations with low
	compressive strength and high drillability,
	such as clay,mudstone,chalk,gypsum,
	salt,soft limestone, etc.
Payment terms	T/T,Western Union,and L/C are
	acceptable

 How to application of tci tricone bit  ?
 

IADC code	WOB	RPM	Applicable Formations
	(KN/mm)	(r/min)
437/447	0.35~0.9	240~70	Very soft formations with low compressive strength and high drillability,
			such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc.
517/527/515	0.35~1.0	220~60	Soft formations with low compressive strength and high drillability,
			such as mudstone,gypsum,salt,soft limestone, etc.
537/547/535	0.45~1.0	220~50	Soft to medium formations with low compressive strength,
			such as medium, soft shale, medium soft limestone, medium
			soft sandstone, medium formation with harder and abrasive interbeds, etc.
617/615	0.45~1.1	200~50	Medium hard formation with high compress strength,
			such as hard shale, limestone, sandstone, dolomite. etc
	0.5~1.1	180~40	Hard formations with high compressive strength,
637/635			such as sandstone, limestone, dolomite ,hard gypsum, marble, etc.

Pictures show:












FAQ


Q: Are you a manufacturer or trading company?
A: We are a specialized manufacturer.

Q: How about the delivery terms?
1. Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery.
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/Fedex express, air, sea, train.

Q: How about discount?
A: Price is based on products and order quantity.

Q: Do you accept sample order?
A: Yes sure, please contact us for details.

Q: How about your after-sales service?
A: As a manufacturer, we offer promt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.

Q: How does your company control the quality?
A: Quality first. In order to guarantee high quality for our products, Roschen always makes a serious inspection for all products and raw materials in strict procedure. We have obtained certificate of ISO9001:2000 in 2004.






For more information please contact:


 
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
 
 
  
 
Website: http://roschen.en.made-in-china.com 
 ; http://roschen.en.made-in-china.com 
http://roschen.en.made-in-china.com