DHD Shank DHD3.5-90 DTH Hammer Bit with flat face, dome & ballistic buttons for blasting bore holes, water well drilling.
| CODE NO. |
DHD3.5-90 |
| Shank type |
DHD |
| Diameter |
90mm |
| gauge buttons |
6 |
| Front buttons |
5 |
| Bit face type |
flat |
| carbide design |
Dome, Ballistic |
ROSCHEN is one the professional manufacturer and supplier of high performance rock drilling tools like DTH Hammers and Bits. PDC Hammers and Bits, DTH drilling pipes and Top Hammer Drilling Tools.
Our tools are widely used in different drilling applications including mining, quarrying, water well drilling, geotechnical industries and etc.
In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length.
Rock drilling tools: Bit shank type of DHD series DTH Bits are designed to fit DTH hammers, which is the most popular design for blasting bore holes, water well drilling. In conjunction with DTH hammers, DTH hammer bits with DHD shank type are designed with a splined drive for rotating the bit in the ground. Rock drill bits in DHD shank are available in different sizes and different styles so they can drill a wide range of hole sizes.
Flat Face Bit
This is an universal design, especially for hard and abrasive rock formation. So typically, flat face with hemispherical buttons design is the most popular choice.
This kind of face shape is suitable for hard to very hard and abrasive rock formations in application with high air pressure. Good penetration rates an resistance to steel wash.
Dome/Hemispherical Buttons
Universal buttons for all rock formation, best suited to hardest and very abrasive rock formation.
Parabolic/Semi-Ballistic Button
It is usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations.
Audited Supplier 
){kind=link}
){kind=link}