Water Well Drill Rig with Rotary Crawler Pneumatic
All drilling rigs here are multifunctional, it can be used with air compressor, mud pump, even we can just use the dry hydraulic drilling method.
The drilling rigs are not only designed for water drilling. They can be used in all conditions based on pore-forming purpose.
They are widely used in industrial and agriculture water project, testing well and other exploration borehole. In particular, drilling hole for geothermal heating, it can also meet the engineering basis for reinforcement, loose gravel drilling rock formation connected with a variety of engineering.
Our drilling rigs are more efficiency and with low failure rate, more economic and durable, and with a high comprehensive cost performance.
ROS-ZJ-300A
The ROS-ZJ-300A DTH drilling rig with AC(Air Compressor) method is capable of drilling up to 203mm diameter holes for pore-forming purposes to a depth of 300 meters.
| ROS-ZJ-300A |
| Weight |
7T |
Air consumption |
17-35m³/min |
| Bore diameter |
140-325mm |
Drill rod diameter |
F76 ,F89, F102 |
| Drilling depth |
300m |
Drill rod length |
1.5m 2.0m 3.0m |
| Stroke |
3.4m |
Elevating capacity |
16T |
| Travelling speed |
2.5km/h |
Swing speed |
40-70rpm |
| Power |
75.8KW |
Swing torque |
5700-7500N.M |
| Rated pressure |
1.7-3.0mpa |
Dimensions |
4100*1950*2600mm |
ROS-ZJ-300
The ROS-ZJ-300 DTH drilling rig with AC(Air Compressor) method is capable of drilling up to 219mm diameter holes for pore-forming purposes to a depth of 300 meters.
| ROS-ZJ-300 |
| Weight |
9T |
Air consumption |
17-35m³/min |
| Bore diameter |
140-325mm |
Drill rod diameter |
F89, F102 |
| Drilling depth |
300m |
Drill rod length |
1.5m 2.0m 3.0m 6m |
| Stroke |
6.6m |
Elevating capacity |
20T |
| Travelling speed |
2.5km/h |
Swing speed |
55-115rpm |
| Power |
84KW |
Swing torque |
6200-8500N.M |
| Rated pressure |
1.7-3.3mpa |
Dimensions |
5900*2000*2850mm |
Audited Supplier 
){kind=link}