DTH Drill Bit DHD3.5-100
DHD shank DTH drill bit with convex face, 13 semi-ballistic carbide buttons for blasting bore holes, water well drilling.
ROSCHEN offers an extensive range of DTH hammer bits with shank type: DHD3.5, DHD340A, DHD3.5R, DHD360, DHD380; and DTH bits hole diameter: 3'', 4'', 5'', 6'', 8''(85mm-350mm).
CODE NO. |
DHD3.5-100 |
Diameter |
100mm |
air holes |
2 |
gauge buttons |
7*13mm |
front buttons |
6*12mm |
face design |
Convex face |
carbide design |
Parabolic(semi-ballistic) |
approx. weight |
5kgs |
Rock drilling tools:
Bit shank type of DHD series DTH Bits are designed to fit DTH hammers, which is the most popular design for blasting bore holes, water well drilling. In conjunction with DTH hammers, DTH hammer bits with DHD shank type are designed with a splined drive for rotating the bit in the ground. Rock drill bits in DHD shank are available in different sizes and different styles so they can drill a wide range of hole sizes.
It is usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations.
Down The Hole Hammer Introduction
superior alloy steel:
Hardness and wear resistance combined alloy steel, supplied by national top level special steel manufacturer superior
Longer Service Life:
All parts of the DTH hammer and bits are heat treated,longer life,less failure.
High Efficiency:
More efficient energy transfer, faster drilling speed,15%-30% faster penetration than conventional DTH hammer.
Saving Oil:
Lower air consumption and lower oil consumption.
Working pressure from 6 Bar to 35 Bar(0.6~ 3.5Mpa)
Down The Hole Hammer Features:
1. Button bit is well known for its high wear resistance on medium-hard to hard abrasive rock formations (between 2.0 Mpa to 2.6 Mpa compressive strength). Featuring spherical tungsten carbide inserts that is known to have strong configuration against carbide fracture.
2. Recommended for eliminating hole deviation.
3. Widely used drifting and tunneling.
4. Bit face design is ideal for medium-hard to hard abrasive rock.
Total Product specifications:
For 3" hammer
DTH bits shank |
Bit Dia. |
No. Air Holes |
Guage Buttons |
Front Buttons |
Weight(kgs) |
Part No. |
mm |
inch |
COP32 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
4.2 |
COP32-85 |
90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4.5 |
COP32-90 |
95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.7 |
COP32-95 |
100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
5 |
COP32-100 |
105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.3 |
COP32-105 |
BR3 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
3.8 |
BR3-85 |
90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4 |
BR3-90 |
95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.3 |
BR3-95 |
100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
4.8 |
BR3-100 |
105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.2 |
BR3-105 |
DHD3.5/COP34 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
4.2 |
DHD35-85 |
90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4.5 |
DHD35-90 |
95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.8 |
DHD35-95 |
100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
5 |
DHD35-100 |
105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.5 |
DHD35-105 |
QL30 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
4.5 |
QL30-85 |
90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4.7 |
QL30-90 |
95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.9 |
QL30-95 |
100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
5 |
QL30-100 |
105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.5 |
QL30-105 |
ROSCHEN hammer bit technical data:
ROSCHEN DTH Bits Specifications |
Hammer Size |
Bits diameter |
Shank |
ROSCHEN CODE |
Metric |
Inch |
1" |
64mm-70mm |
2 1/2"-2 3/4" |
BR1 |
ROS 11 |
2" |
70mm-95mm |
2 3/4"-3 3/4" |
MACH20/BR2 |
ROS 22 |
3" |
90mm-102mm |
3 1/2"-4" |
COP32/COP34/MACH303 |
ROS 32 |
M30/DHD3.5/BR3 |
ROS 34 |
4" |
105mm-152mm |
4 1/8"-6" |
COP44/DHD340/MACH44 |
ROS 42 |
SD4/M40/QL40 |
ROS 44 |
5" |
133mm-165mm |
5 1/4"-6 1/2" |
COP54/DHD350R/MACH50 |
ROS 52 |
SD5/M50/QL50/BR5 |
ROS 54 |
6" |
152mm-254mm |
4 1/8"-10" |
COP64/DHD360/SD6 |
ROS 62 |
M60/QL60/Bulroc BR6 |
ROS 64 |
8" |
203mm-330mm |
8"-13" |
COP84/DHD380/SD8 |
ROS 82 |
QL80/M80/M85 |
ROS 84 |
10" |
254mm-380mm |
10"-15" |
SD10 |
ROS 100 |
NUMA100 |
12" |
305mm-508mm |
12"-20" |
DHD1120/SD12 |
ROS 120 |
NUMA120/NUMA125 |
Notes: |
Metzke, Remet thread is available! |
Any special size of DTH bits will be available by requests. |
Shank can be available:
1), Dia. 64mm-70mm shank Bulroc BR1
2), Dia. 70mm-95mm shank Halco MACH20, Bulroc BR2
3), Dia. 90mm-102mm shank COP32, COP34, Halco MACH303, M30, DHD3.5, Bulroc BR3
4), Dia. 105mm-152mm shank COP44, DHD340, Halco MACH44, SD4, M40, QL40, Bulroc BR4
5), Dia. 135mm-165mm shank COP54, DHD350R, COP54, Halco MACH50, SD5, M50, QL50, Bulroc BR5
6), Dia. 152mm-254mm shank COP64, DHD360, SD6, M60, QL60, Bulroc BR6
7), Dia. 203mm-330mm shank COP84, DHD380, SD8, QL80
8), Dia. 254mm-380mm shank SD10, Numa100
9), Dia. 305mm-508mm shank DHD1120, SD12, N120, N125
10), Dia. 405mm-864mm shank SD15, SD18
11), VKP80, VKP95, CIR90, CIR100, CIR110, CIR150, CIR200...
We can also provide related products DTH hammers, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc
Product photos
ROSCHEN Manufacturing workshop
ROSCHEN Packing workshop
Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damagement during transportation. Also we can customize package according to your special requests.
Production time:
Generally need 15-25 days
Transportation:
By air, By Express or By sea according to your requests.
For more information, please contact:
web site: roschen.en.made-in-china.com