Integral Blade Stabilizer and Drill Stem Spiral Blade Stabilizer for Oil Drilling

Product Details
Customization: Available
Type: Core Drill
Usage: Metal Drilling, Masonry Drilling, Well Drilling, Wood Drilling
Gold Member Since 2017

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, HSE, QHSE, HQE, QSR, ISO 50001
  • Integral Blade Stabilizer and Drill Stem Spiral Blade Stabilizer for Oil Drilling
  • Integral Blade Stabilizer and Drill Stem Spiral Blade Stabilizer for Oil Drilling
  • Integral Blade Stabilizer and Drill Stem Spiral Blade Stabilizer for Oil Drilling
Find Similar Products

Basic Info.

Model NO.
6 - 26 inch
Certification
API
Transport Package
Wooden Box
Specification
6inch - 26inch
Trademark
ROSCHEN
Origin
China
HS Code
843143210
Production Capacity
3000

Product Description

Integral Blade Stabilizer or Drill Stem Spiral Blade Stabilizer

There are two kinds of integral stabilizers:

  1. spiral integral blade stabilizer .
  2. straight integral blade stabilizer.
Stabilizers can increase the bit life, drilling speed and well bore quality. It also can stabilize the drilling tools in the drilling process of oil, gas and geological exploration.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation.

HF 1000
Crushed tungsten carbide held in a nickel bronze matrix. The 3 mm grain size ensures greater concentration of carbide which is ideal for soft formation drilling.

HF 2000
Trapezoidal tungsten carbide inserts held in a sintered carbide nickel bronze matrix. This will give a greater depth of carbide coverage - ideal for high deviation drilling in abrasive formations.

HF 3000
Tungsten carbide inserts set in a powder spray deposit ideal for abrasive formations. 97% bonding guaranteed, certified by ultrasonic report. Recommended for non- magnetic stabilizers.

Bit OD: 6" - 26"
Material: AISI 4145H, AISI 4145H Mod, and Non-magnetic material
Hardfacing Type: HF1000, HF2000, HF3000, HF4000
 
TCI
Tungsten carbide inserts (button type). The inserts have been developed to allow cold insertion and maintain close fit. A greater concentration of inserts on the bottom third of the blade and leading edge will increase surface contact to reduce wear in highly abrasive formations.

 
Hardfacing: HF1000, HF2000, HF3000, HF4000 Material: AISI 4145H, 4145H Mod, Non-magnetic Material
Bit OD: 6''~26'' Type A: Drill String Type
Type B: Near Bit Type Product Name: Stabilizer
High Light: directional drilling tools
down the hole drilling tools

Specification:
Working outside diameter OD Salvage diameter OD Top conn. Bottom conn. Hole ID Length of fishing neck Axial band width Take long Remarks
mm inch mm inch mm inch mm inch mm inch mm inch
98 3 7/8 79.4 3 1/8 NC23 NC23 31.8 1 1/4 240 9 29/64 34 11/32 240 9 29/64 DS
149.2 5 7/8 120.7 4 3/4 NC38 NC38 50.8 2 600 23 5/8 50 1 31/32 350 13 3/4 DS
3 1/2REG BH
152 6 120.7 4 3/4 NC38 NC38 50.8 2 600 23 5/8 50 1 31/32 350 13 3/4 DS
3 1/2REG BH
215.9 8 1/2 165 6 1/2 NC50 NC50 57.2 2 1/4 600 23 5/8 60 2 3/8 406 16 DS
4 1/2REG BH
311.15 12 1/4 203 8 6 5/8 REG 6 5/8 71.4 2 13/16 700 27  9/16 75 2 61/64 406 16 DS
REG BH
444.5 17 1/2 229 9 7 5/8 REG 7 5/8 76.5 3 700 27  9/16 121 4 3/4 460 18  7/64 DS
REG BH
558.8 22 241.3 9 1/2 7 5/8 REG 7 5/8 76.5 3 762 30 121 4 3/4 508 20 DS
REG BH
660.4 26 241.3 9 1/2 7 5/8 REG 7 5/8 76.5 3 762 30 121 4 3/4 508 20 DS
REG BH
711.2 28 241.3 9 1/2 7 5/8 REG 7 5/8 76.5 3 762 30 121 4 3/4 508 20 DS
REG BH
914.4 36 241.3 9 1/2 7 5/8 REG 7 5/8 76.5 3 889 35 121 4 3/4 610 24 DS
REG BH
DS: Drilling String type; BH: Bottom Hole Type

 

 
Integral Blade Stabilizer and Drill Stem Spiral Blade Stabilizer for Oil Drilling
 

 
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier