DTH drill Bit COP32-90
| CODE NO. |
COP32-90 |
| Shank type |
COP32 |
| Diameter |
90mm |
| air holes |
2 |
| gauge buttons |
7*13mm |
| face buttons |
5*12mm |
| Bit face type |
convex face |
| carbide design |
parabolic(semi-ballistic) |
| approx. weight |
4.5Kgs |
Designed to match all conceivable applications for water well industries, mining and construction industries. ROSCHEN is rock drilling tools manufacturer, we has a comprehensive range of DTH hammer bits with DHD shanks type for a wide range of hole sizes.
Rock drilling tools ROSCHEN has a comprehensive range of DTH drill bits with COP shanks type for a wide range of hole sizes, which have been designed to match all conceivable applications for water well industries, mining and construction.
Shank type:COP32, COP34, COP44, COP54, COP64; and DTH rock drill bits hole diameter: 3'', 4'', 5'', 6'', 8''(85mm-350mm).
Convex Face
A classic design for soft to medium hard rock formation which is not so abrasive. This design have very excellent penetration rate but poor in hole deviation if rock is too hard.
For high penetration rate in soft to medium-hard with low to medium air pressure. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
Semi-Ballistic/Parabolic Buttons
Excellent penetration rate, but only suited to medium hard and not so very abrasive rock formation.
Roschen's robust DTH bits are designed to extend bit life and in-hole drilling time with hardened premium steel alloy and tungsten carbide bits. Optimized flushing holes and multiple face designs provide the ideal design for each application. Roschen's DTH Bits use shank and spline configurations matching most industry-trusted DTH hammers.
Total Product specifications:
For 3" hammer
DTH bits shank |
Bit Dia. |
No. Air Holes |
Guage Buttons |
Front Buttons |
Weight(kgs) |
Part No. |
| mm |
inch |
| COP32 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
4.2 |
COP32-85 |
| 90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4.5 |
COP32-90 |
| 95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.7 |
COP32-95 |
| 100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
5 |
COP32-100 |
| 105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.3 |
COP32-105 |
| BR3 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
3.8 |
BR3-85 |
| 90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4 |
BR3-90 |
| 95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.3 |
BR3-95 |
| 100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
4.8 |
BR3-100 |
| 105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.2 |
BR3-105 |
| DHD3.5/COP34 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
4.2 |
DHD35-85 |
| 90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4.5 |
DHD35-90 |
| 95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.8 |
DHD35-95 |
| 100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
5 |
DHD35-100 |
| 105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.5 |
DHD35-105 |
| QL30 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
4.5 |
QL30-85 |
| 90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4.7 |
QL30-90 |
| 95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.9 |
QL30-95 |
| 100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
5 |
QL30-100 |
| 105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.5 |
QL30-105 |
ROSCHEN hammer bit technical data:
| ROSCHEN DTH Bits Specifications |
| Hammer Size |
Bits diameter |
Shank |
ROSCHEN CODE |
| Metric |
Inch |
| 1" |
64mm-70mm |
2 1/2"-2 3/4" |
BR1 |
ROS 11 |
| 2" |
70mm-95mm |
2 3/4"-3 3/4" |
MACH20/BR2 |
ROS 22 |
| 3" |
90mm-102mm |
3 1/2"-4" |
COP32/COP34/MACH303 |
ROS 32 |
| M30/DHD3.5/BR3 |
ROS 34 |
| 4" |
105mm-152mm |
4 1/8"-6" |
COP44/DHD340/MACH44 |
ROS 42 |
| SD4/M40/QL40 |
ROS 44 |
| 5" |
133mm-165mm |
5 1/4"-6 1/2" |
COP54/DHD350R/MACH50 |
ROS 52 |
| SD5/M50/QL50/BR5 |
ROS 54 |
| 6" |
152mm-254mm |
4 1/8"-10" |
COP64/DHD360/SD6 |
ROS 62 |
| M60/QL60/Bulroc BR6 |
ROS 64 |
| 8" |
203mm-330mm |
8"-13" |
COP84/DHD380/SD8 |
ROS 82 |
| QL80/M80/M85 |
ROS 84 |
| 10" |
254mm-380mm |
10"-15" |
SD10 |
ROS 100 |
| NUMA100 |
| 12" |
305mm-508mm |
12"-20" |
DHD1120/SD12 |
ROS 120 |
| NUMA120/NUMA125 |
| Notes: |
| Metzke, Remet thread is available! |
| Any special size of DTH bits will be available by requests. |
Shank can be available:
1), Dia. 64mm-70mm shank Bulroc BR1
2), Dia. 70mm-95mm shank Halco MACH20, Bulroc BR2
3), Dia. 90mm-102mm shank COP32, COP34, Halco MACH303, M30, DHD3.5, Bulroc BR3
4), Dia. 105mm-152mm shank COP44, DHD340, Halco MACH44, SD4, M40, QL40, Bulroc BR4
5), Dia. 135mm-165mm shank COP54, DHD350R, COP54, Halco MACH50, SD5, M50, QL50, Bulroc BR5
6), Dia. 152mm-254mm shank COP64, DHD360, SD6, M60, QL60, Bulroc BR6
7), Dia. 203mm-330mm shank COP84, DHD380, SD8, QL80
8), Dia. 254mm-380mm shank SD10, Numa100
9), Dia. 305mm-508mm shank DHD1120, SD12, N120, N125
10), Dia. 405mm-864mm shank SD15, SD18
11), VKP80, VKP95, CIR90, CIR100, CIR110, CIR150, CIR200...
We can also provide related products DTH hammers, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc
Product photos
Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damagement during transportation. Also we can customize package according to your special requests.
Production time:
Generally need 15-25 days
Transportation:
By air, By Express or By sea according to your requests.
ROSCHEN Manufacturing workshop
ROSCHEN Packing workshop
FAQ
Q: Are you a manufacturer or trading company ?
A: We are a specialized manufacturer.
Q: How about the delivery terms ?
1. Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery.
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/Fedex express, air, sea, train.
Q: How about discount ?
A: Price is based on products and order quantity.
Q: Do you accept sample order?
A: Yes sure, please contact us for details.
Q: How about your after-sales service?
A: As a manufacturer, we offer promt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.
For more information, please contact:
web site: roschen.en.made-in-china.com
Audited Supplier 
){kind=link}