Water Well Drilling Rig 600m and 800m
All drilling rigs here are multifunctional, it can be used with air compressor, mud pump, even we can just use the dry hydraulic drilling method.
The drilling rigs are not only designed for water drilling. They can be used in all conditions based on pore-forming purpose.
They are widely used in industrial and agriculture water project, testing well and other exploration borehole. In particular, drilling hole for geothermal heating, it can also meet the engineering basis for reinforcement, loose gravel drilling rock formation connected with a variety of engineering.
Our drilling rigs are more efficiency and with low failure rate, more economic and durable, and with a high comprehensive cost performance.
ROS-ZJ-600
The ROS-ZJ-600 DTH drilling rig with AC(Air Compressor) method is capable of drilling up to 219mm diameter holes for pore-forming purposes to a depth of 600 meters.
| ROS-ZJ-600 |
| Weight |
12T |
Air consumption |
17-35m³/min |
| Bore diameter |
140-350mm |
Drill rod diameter |
F108, F114, F127 |
| Drilling depth |
600m |
Drill rod length |
1.5m 2.0m 3.0m 6m |
| Storke |
6.6m |
Elevating capacity |
28T |
| Travelling speed |
2.5km/h |
Swing speed |
45-115rpm |
| Power |
132KW |
Swing torque |
8500-11000N.M |
| Rated pressure |
1.7-3.5mpa |
Dimensions |
6000*2200*2850mm |
ROS-ZJ-800
The ROS-ZJ-800 DTH drilling rig with AC(Air Compressor) method is capable of drilling up to 219mm diameter holes for pore-forming purposes to a depth of 800 meters.
| ROS-ZJ-800 |
| Weight |
13.5T |
Air consumption |
17-42m³/min |
| Bore diameter |
140-400mm |
Drill rod diameter |
F108, F114, F127 |
| Drilling depth |
800m |
Drill rod length |
1.5m 2.0m 3.0m 6m |
| Storke |
6.6m |
Elevating capacity |
30T |
| Travelling speed |
2.5km/h |
Swing speed |
55-120rpm |
| Power |
140KW |
Swing torque |
9000-13150N.M |
| Rated pressure |
1.7-3.5mpa |
Dimensions |
6100*2200*2900mm |
Audited Supplier 
){kind=link}
){kind=link}